Hiring a tree service goes smoothly when you know the steps before you call. Well-run jobs in Boise and across the Treasure Valley follow the same path, from the first request to the final walk-through. Parker Tree Service treats a 40-foot silver maple over a driveway and one over a greenhouse as two very different jobs, and each step below is where that difference gets planned.
This guide covers what to expect from a tree service at each stage, what a written estimate should include and how scheduling works. Use it to know what to ask for, what to have ready and what a careful crew will do on your property.
The Tree Service Process at a Glance
Small pruning jobs move through these stages quickly. Large removals near structures take more planning at each one.
| Stage | What happens | What you should have at the end |
| 1. Request | You describe the trees and your concern | A site visit on the calendar |
| 2. Site visit | An arborist inspects trees, targets and access | Clear answers on what each tree needs |
| 3. Written estimate | The scope of work is put in writing | A document that names every tree and every task |
| 4. Permits and utilities | City, HOA and utility sign-offs | Approvals in hand before work starts |
| 5. Scheduling | The job is booked by crew, equipment and weather | A work date and a plan if weather moves it |
| 6. Work day | The crew protects the site and does the work | Work done to the written scope |
| 7. Cleanup and follow-up | Debris handled as written, then a final walk-through | A site that matches the estimate |
Step 1: Requesting an Estimate
When you call or fill out a request form, say which trees you’re concerned about and why: dead limbs, branches on the roof, a new lean, storm damage. Mention locked gates, dogs, a narrow side yard or a septic field. Photos help the office decide how soon someone should come out.
If a limb is already on the house or hanging over a walkway, say that first. That is an emergency, handled through our 24/7 emergency tree service, and it doesn’t wait in line for a routine estimate.
Write your own questions down before the visit. Who will do the work? What is included? How will the crew protect the lawn and the house? Asking every company the same questions makes their answers easy to compare.
Check Credentials Before You Sign
Confirm the company’s Idaho contractor registration and ask for a certificate of insurance, sent straight from its agent, showing liability and workers’ compensation coverage. A few minutes of checking protects you if something goes wrong on your property.
Step 2: The Site Visit With an ISA Certified Arborist
A good tree service estimate in Boise starts with someone walking the property. Ask whether an ISA Certified Arborist will look at your trees. That credential means the person passed the International Society of Arboriculture’s exam and keeps it current with continuing education. Our ISA Certified Arborists look at the whole site around the tree you pointed at.
On a typical visit, the arborist checks:
- Species, size and health. Trunk diameter is measured at breast height (DBH), 4.5 feet above the ground.
- Defects. Deadwood, cracks, cavities, decay at branch unions and fungal conks on the trunk or root flare.
- Targets. What a falling limb or trunk could hit: a roof, fence, patio, overhead service line or the neighbor’s yard.
- Access. Gate width, slopes, soft ground, and whether a lift or chipper can reach the tree.
- Utilities. Overhead lines and service drops, plus buried lines if stump grinding is part of the job.
Sometimes the visit changes the plan. A tree you wanted removed may only need a clearance prune, or a tree you hoped to keep may have decay that makes removal safer. A good arborist explains the reasoning and lets you decide.
Field Note: Be home for the visit if you can. You know where the sprinkler lines run and which gate sticks. Five minutes of that spares the crew a lot of guesswork on the work day.
What Should a Tree Service Estimate Include?
A written estimate is the plan both sides work from. If something isn’t on paper, assume it isn’t included. A complete estimate covers:
- Each tree and its work. Location and species, such as “silver maple, back fence,” plus the task named plainly: removal, crown cleaning, clearance pruning or reduction.
- The pruning standard. All pruning per ANSI A300, with no topping.
- The stump. Left at a stated height, or ground, and to what depth.
- Wood and debris. Hauled away, chipped and left as mulch, or cut into firewood rounds and left on site.
- Site protection. Ground mats over lawns and controlled lowering over roofs and fences.
- Permits and timing. Which approvals apply, who gets them and the expected work window.
- Who is on site. Whether an ISA Certified Arborist does the work or supervises it.
- Changes. How the crew handles a surprise, such as hidden decay, once work has started.
Pruning estimates need extra detail. “Trim the maple” can mean almost anything. A clear pruning scope names the type of pruning, the clearance target and roughly how much live canopy will come off.
Pro Tip: Ask every company for the same scope in writing. When two estimates don’t match, line them up item by item. Most of the time one includes cleanup, stump grinding or haul-away and the other leaves it out.
Step 3: Permits, HOA Approval and Utility Coordination
The arborist should flag these at the site visit, and the estimate should say who handles each one.
- Public trees. In Boise, trees in the public right-of-way, often the strip between sidewalk and street, fall under Boise Community Forestry, and work on them generally needs city approval first. Other cities set their own rules.
- HOA approval. Many subdivisions require committee approval before a tree comes down, even on a private lot. Get it in writing.
- Overhead power lines. Work close to energized lines is limited to line-clearance qualified workers. Idaho Power may need to clear or de-energize a line before a crew can work near it.
- Buried utilities. Before stump grinding, a careful company requests utility locates through 811. Locates mark public utility lines. They don’t mark private lines such as sprinkler pipes, landscape lighting or a line to a shop, so point those out.
Industry Warning: If a branch is touching a power line, stay away from the tree and anything in contact with it, and call the utility. Electricity can travel through branches and wet ground.
How Tree Service Scheduling Works
Once you approve the written scope, the job goes on the schedule. Three things set the date: the crew and equipment the job needs, how urgent the hazard is and the weather.
- Crew and equipment. A small pruning job may need two people and a chipper. A large removal over a house may need a lift or crane and gets booked around it.
- Urgency. Hazard trees over homes and storm damage move ahead of routine work.
- Weather. High wind, lightning, heavy snow and ice stop work in the canopy. A good company calls you when the date moves.
Season matters too. Dormant-season work, roughly November through February, is often easier to schedule. Frozen ground helps protect lawns from equipment ruts, and bare branches give the crew a clear view of the tree’s structure. A hazard tree should not wait for winter.
What Happens on the Work Day
Before the crew arrives, move vehicles, keep pets inside, unlock gates and move anything fragile away from the work area. Then expect the crew to:
- Walk the job with the written scope and confirm each tree and task with you.
- Hold a short safety briefing and mark off a work zone with cones or tape.
- Lay ground protection where trucks or equipment cross the lawn.
- Do the work. On removals, pieces are lowered on ropes over structures or dropped only where there is open space.
- Chip brush and cut wood as they go.
Removal days have their own rhythm: how long the job runs, what gets lowered on ropes and what’s left when the trucks pull out. Plan to be reachable by phone even if you won’t be home.
| The Messy Middle: When the Tree Isn’t What It Looked Like From the GroundA tree can look sound from the yard and still hide decay inside the trunk or at a branch union. A climber who finds a hollow section 30 feet up can’t tie into that stem, so the plan shifts from climbing to a lift or crane, and the work day may move while that equipment is booked. Decay at a union is a common culprit; our post on crotch rot in branch unions explains what it looks like.The way to handle it starts at the estimate. The arborist should inspect before writing the scope: sound the trunk with a mallet, look for fungal conks and check unions with binoculars. Any uncertainty belongs on the written estimate.Then agree, before work starts, on how a change in scope would be handled. The crew stops, explains what they found and gets your OK before switching methods. If a company won’t put that in writing, keep looking. |
Cleanup and Follow-Up
Cleanup should match what’s written on the estimate: chips hauled or left as mulch, wood hauled or cut to firewood length, the stump handled as agreed, and the lawn and hardscape raked and blown clear.
Before the crew leaves, walk the property with the crew lead. Check every tree against the scope, look over the lawn, fences and sprinkler heads, and point out anything that needs attention while the crew is still there.
Keep the estimate and the arborist’s notes. For pruned trees, ask when the tree should be looked at again. After storm damage, keep your photos and the written description of the work with your insurance claim.
If You’re Not Sure Where to Start
| If… | Then… |
| A limb is on the house or blocking the driveway right now | Call for emergency service, photograph the damage and review our answers to common insurance questions after a tree falls. |
| The tree is dead or has a crack through the trunk | Ask for a tree risk assessment soon. Don’t wait for spring if it stands over a structure. |
| The tree is healthy but crowding the roof | Ask the arborist about a clearance prune before deciding on removal. |
| The tree is in the street strip or an HOA common area | Confirm who owns it and get approval before anything is scheduled. |
| The work can wait | Get the scope in writing now and book the work for the dormant season. |
The Bottom Line
- Hiring a tree service follows a predictable path: request, site visit, written scope, approvals, scheduling, work day, cleanup.
- Ask for an ISA Certified Arborist at the site visit.
- If it isn’t on the written estimate, assume it isn’t included.
- Permits, HOA approval and utility coordination happen before the crew arrives.
- Finish every job with a walk-through against the written scope.
Get a Free Written Estimate From an ISA Certified Arborist
Our ISA Certified Arborists look at the tree, the access and what’s underneath, then put the scope of work in writing before the crew arrives. Request your free estimate, or browse our full list of tree care services to see everything we handle across the Treasure Valley.
About the Author
Parker Tree Service is a family-run tree care company founded in 1937 by George “Brownie” Parker. Justin Parker manages the Treasure Valley business from Caldwell, Idaho, and the team includes ISA Certified Arborists. The company is licensed, bonded, and insured (Licensed Contractor RCE #26718).
Years in the industry: In business since 1937.
Technical focus for this guide: Job scoping and written estimates for tree removal, trimming, stump grinding and emergency work.
Professional profile: Parker Tree Service company history and team